Putting a S3 PTO in a Stage One

JimB · Post by **JimB** » Tue Apr 20, 2021 9:30 am

Technically not especially gifted here. But I have a decent mechanic. Here in Indonesia.

Will a PTO off a S3/Swb fit onto the LT95 transfer case. I looked at it. It looks ok, albeit a tight fit. I just want to know if the transfer case PTO plate is the same?

The bloke wants a fair bit for the PTO and I don't want to find out it doesn't fit. He's quite far away so I can't physically inspect the PTO and measure it.

JimB · Post by **JimB** » Tue Apr 20, 2021 9:35 am

This is the PTO housing.

map1275 · Post by **map1275** » Thu Apr 22, 2021 6:32 am

Considering that the parts list doesn't even list the same gasket for the two variants, I'd say not.

Mik · Post by **Mik** » Thu Apr 22, 2021 8:26 pm

Pretty sure thats a No - but with modifications everything is possible

JimB · Post by **JimB** » Wed Apr 28, 2021 1:44 pm

Thanks gentlemen. I'll stick to my hand winch, snatch block, and assortment of ropes. Local blokes say the PTO winches can be dangerous if you are not super careful. And I'm not super careful.

disco2hse · Post by **disco2hse** » Thu Nov 04, 2021 12:45 pm

So yeah. Series III won't go in. Pretty much everything is different to an LT95 PTO output.

I have a PTO winch on mine and it is fine, safetywise.

Stage 1 V8

Putting a S3 PTO in a Stage One

Putting a S3 PTO in a Stage One

Re: Putting a S3 PTO in a Stage One

Re: Putting a S3 PTO in a Stage One

Re: Putting a S3 PTO in a Stage One

Re: Putting a S3 PTO in a Stage One

Re: Putting a S3 PTO in a Stage One