Page 2 of 4
Re: Aussie ute
Posted: Thu Aug 18, 2016 11:27 am
by Geoff
Oh God, I am so envious!!
Re: Aussie ute
Posted: Sun Aug 21, 2016 11:35 am
by Lewy
Geoff wrote:Oh God, I am so envious!!
My wife isn't. She is not happy
More time in the shed for me though. Cleaned up the dash today.
Re: Aussie ute
Posted: Mon Sep 12, 2016 12:23 pm
by Lewy
Re: Aussie ute
Posted: Tue Sep 13, 2016 12:17 am
by disco2hse
Looks good from every angle.
Did you do the windscreen with the frame up? Mostly, I've seen it easier with the frame down, on the bonnet. Then you are working down onto the glass and getting those fiddly little screws in is much easier.
Great looking tyres by the way.
Re: Aussie ute
Posted: Tue Sep 13, 2016 11:06 am
by Lewy
I did it window still up. It wasn't too bad as I used a magnetic screwdriver to guide them in.
Re: Aussie ute
Posted: Wed Sep 14, 2016 11:32 am
by Lewy
Re: Aussie ute
Posted: Mon Sep 26, 2016 12:25 pm
by Lewy
Re: Aussie ute
Posted: Mon Sep 26, 2016 12:51 pm
by Geoff
Great photos
Re: Aussie ute
Posted: Tue Sep 27, 2016 12:36 pm
by Lewy
Cheers. It's hard to take a bad photo when there's a Landy in it
Re: Aussie ute
Posted: Fri Sep 30, 2016 5:44 am
by Robstal110
That's a stunning looking truck.
Re: Aussie ute
Posted: Fri Sep 30, 2016 11:02 am
by Lewy
Re: Aussie ute
Posted: Fri Sep 30, 2016 11:06 am
by Lewy
Robstal110 wrote:That's a stunning looking truck.
Thanks. I feel the same.
Re: Aussie ute
Posted: Fri Sep 30, 2016 7:57 pm
by Geoff
What's with all that starting off in first gear? - shouldn't be necessary - you haven't still got the restrictors in have you?
Oh, and what's that chip frying noise in the back?
Re: Aussie ute
Posted: Sat Oct 01, 2016 1:38 am
by Lewy
Geoff wrote:What's with all that starting off in first gear? - shouldn't be necessary - you haven't still got the restrictors in have you?
Oh, and what's that chip frying noise in the back?
10 years of owning a 110 with an LT95 with 0.996 high range gears and not being used to the low gearing.
I haven't even checked the carbies yet.
Typically Gopro noise from the case hitting the mount.
Re: Aussie ute
Posted: Sat Oct 01, 2016 11:19 am
by Geoff
Ah, I wondered if higher ratio gears had been put in. You should be able to see the restrictors if you take the air intake elbows off and have a look/poke around in there, although there can't be many Stage Ones still around that haven't had them removed long ago. Another great photo btw - looks like it was straight out of some 1980s Land Rover promo material!