Indicator Stalk
Posted: Mon Jun 10, 2013 5:02 pm
Is it just me or was I going mad when the genuine Lucas indicator stalk (575383) I ordered fitted like a glove on a foot
Not only did the cancelling lug on the column catch the prongs on the switch when in the off position the stalk in my opinion is over cranked.
The worst thing was the multiplug - despite it fitting the loom ok one side of it had the wires round a different way so it was a good job I spotted it first
The only reason I spotted it was because interestingly enough the old stalk plug had been sliced in two to account for the variation in pin location.
I wasn't expecting to file a profile on to the cancelling prongs nor slicing the rubber multiplug in half for it to fit the loom properly.
Does this mean the Stage1 multiplug on the main loom for the stalk is a different configuration to a regular LR
Not only did the cancelling lug on the column catch the prongs on the switch when in the off position the stalk in my opinion is over cranked.
The worst thing was the multiplug - despite it fitting the loom ok one side of it had the wires round a different way so it was a good job I spotted it first
The only reason I spotted it was because interestingly enough the old stalk plug had been sliced in two to account for the variation in pin location.
I wasn't expecting to file a profile on to the cancelling prongs nor slicing the rubber multiplug in half for it to fit the loom properly.
Does this mean the Stage1 multiplug on the main loom for the stalk is a different configuration to a regular LR