Page 1 of 1
Non viscous fan
Posted: Tue Apr 05, 2005 4:40 pm
by Blackwitch
Turns out it wasn't the gearbox - it was noise from the fan which eventually came loose and snapped off its blades as I was driving along in the landie on Sunday.
I've been told there may be radiator damage - fingers crossed there isn't - but does anyone know where I could get a replacement fan?
Cheers
Blackwitch
Posted: Wed Apr 06, 2005 8:19 am
by Guest
Actually - don't know if it's a viscous or non-viscous fan - anyone know which is the correct part for a stage 1 and the part number?
A desperate....
Blackwitch
Posted: Thu Apr 07, 2005 7:40 pm
by db
Mine has a viscous fan - 7 plastic blades and plastic hub attached by 4 bolts to a largeish cast finned hub.
According to the parts manual there was also a non-viscous version with 5 metal blades riveted to a pressed metal hub.
It gives the following numbers for the blades part:
viscous (plastic) 614739
non-viscous (metal) 613087
David
Posted: Thu Apr 07, 2005 8:19 pm
by Blackwitch
Mine is the one with the plastic blades - cheers for the info David.
It into the garage tomorrow to see if anything else was damaged when it blew - I'll let you know how I get on.
Blackwitch