Stage 1 V8

Hi all-

I am in need of emissions equipment for my 1980 SW. Mine apparently was removed. It made it through US customs as meeting EPA/DOT specs, but Anchorage has some very strict standards and even stricter inspection technicians. Does anyone know what all needs to be installed for that year and where I can get it?

the air in jection system is same as on a rangy classic, as is the cold start thingy..

Thanks. I could probably find the air intake part, but the stack that goes on the exhaust manifold may be more difficult to find. Anyone think they can get one over there? All I have is an empty spot on the space where mine was. I will be happy to reimburse you for your time.

Here are pictures from the manual of what I am trying to find:






I am beginning to wonder if 1980 UK models actually had this stuff fitted standard? If they didn't then it souldn't be a problem with my local enviro cops.

bumped for above edit . . .

I think i have a engine sitting in the shed woth all this still on. Mine may have been made for the export as it has all the tinted glass.
terry

Terry-

Would you be willing to sell? If you have a moment to take some pictures, it would be much appreciated!

Try and get some piccys tomorrow. I know the flexy alli pipe is not good.
terry

Had a look at the engine last night. The spout is there but thats all. None of the other bits. Even the spout is loose where i used it as a wiggle point to get the engine out.
Tel

OK. Thanks anyway.

Look at the prices for this stuff . . . not crazy except to the flapper part or "control unit" . . . how can you justify that price?

Some parts are still available GENUINE from L/R:
ERC7075 ADAPTOR $49.00 CAD;
587653 CONTROL UNIT $450.00;
ERC4989 GASKET $9.00 CAD;
603851 GROMMET $3.60 CAD;
613519 HOSE AIR-CLEANER $2.80 CAD;
ERC9398 HOSE $35.00 CAD;
ERC8695 PIPE $4.20 CAD;
614920 SUPERCEDED BY ETC6685 HOSE-AIR $130.00 CAD;for item ERC3920.
ERC3920 SHIELD[ may try to fit instead of ERC6373] $120.00 CAD;
ERC7079 DEFLECTOR $15.00 CAD.

I have 2 of 587653 CONTROL UNIT for some reason both of which you can have.

There is a pic here:

http://www.gmaprs.pwp.blueyonder.co.uk/v8.jpg

They have some of the other parts attached.

Jon

If nobody else wants this part i would be interested

Timbo-

Do you need these to pass MoT? I need them to pass my emissions tests up here. Otherwise, I would have fitted my Edelbrock manifold and Holley 470CFM off road carb long ago.

-Bobby

As I have 2 of them how about you have 1 each.

Jon

I dont need them for my mot so you can have them both if you need them arctic or if you only need one i would be interested in the other as suggested