Need opinion on eBay dizzy
- arcticrover
- Posts: 215
- Joined: Tue Oct 18, 2005 11:38 pm
- Location: Great White North
- Contact:
Need opinion on eBay dizzy
Hey all. I asked before, but no one saw. Does this look suitable for our engine? It certainly is a lot cheaper than anything else that is new. http://cgi.ebay.com/ebaymotors/Accel-Di ... enameZWD1V
1981 Stage 1 SW
http://arcticrover.blogspot.com/
http://arcticrover.blogspot.com/
Hi Arcticrover
I posted this a while ago, don't know if it will help you or not.
Aluminum V8
The Oldsmobile/Buick 215 V8 was a small 215 in³ aluminum engine for midsize cars of the 1960s. It was introduced in the 1961 Buick Special, Oldsmobile Cutlass F-85 (where it was called the Rockette), and Pontiac Tempest and retired by General Motors just three years later due to high production costs.
The tooling was sold to Britain's Rover Group, and this Rover V8 engine saw widespread use by many manufacturers. This engine was the basis for a 198 in³ V6 which, after being sold to and bought back from Jeep in the 1970s, became the current GM 3800 engine.
Don't know wether it will tell you wether the dizzy will fit the engine??? Looks very nice though.
Regards Huzey
I posted this a while ago, don't know if it will help you or not.
Aluminum V8
The Oldsmobile/Buick 215 V8 was a small 215 in³ aluminum engine for midsize cars of the 1960s. It was introduced in the 1961 Buick Special, Oldsmobile Cutlass F-85 (where it was called the Rockette), and Pontiac Tempest and retired by General Motors just three years later due to high production costs.
The tooling was sold to Britain's Rover Group, and this Rover V8 engine saw widespread use by many manufacturers. This engine was the basis for a 198 in³ V6 which, after being sold to and bought back from Jeep in the 1970s, became the current GM 3800 engine.
Don't know wether it will tell you wether the dizzy will fit the engine??? Looks very nice though.
Regards Huzey
I started off with nothing, and still got most of it left!
1989 110 V8 Hard Top
1955 Fordson Major E1a
1989 110 V8 Hard Top
1955 Fordson Major E1a
- arcticrover
- Posts: 215
- Joined: Tue Oct 18, 2005 11:38 pm
- Location: Great White North
- Contact:
Samro-
Are you saying Buick model only or Rover as well? I don't know if the Rover dizzy is any different. . .
Are you saying Buick model only or Rover as well? I don't know if the Rover dizzy is any different. . .
1981 Stage 1 SW
http://arcticrover.blogspot.com/
http://arcticrover.blogspot.com/
- arcticrover
- Posts: 215
- Joined: Tue Oct 18, 2005 11:38 pm
- Location: Great White North
- Contact:
I just read Hardcastle's second Rover Engine book and it would seem that this "Buick" dizzy is not compatible with the Rover block because of changes in the dizzy's drive gear over the years. For one third the price of the Mallory, though, it may be worth ordering it and attemping to fit it . . . I can always get rid of it if it doesn't fit.
1981 Stage 1 SW
http://arcticrover.blogspot.com/
http://arcticrover.blogspot.com/