Page 1 of 1
Railko bushes
Posted: Thu Oct 01, 2009 6:15 pm
by pomme fritz
Hi
Does anyone happen to know if there are any stocks of Railko bushes kicking around in the UK (might do a little essential shopping while on my Hols!)
Cheers,
Fritz
Posted: Thu Oct 01, 2009 6:41 pm
by 5988
Pegasus parts do them
http://www.pegasusparts.co.uk/ourshop_9 ... -1930.html
Very good quality the ones i got
Posted: Fri Oct 02, 2009 5:45 am
by Bumpkin
Hiya
I am working with a New Zealander at the mo and he said you army sold of all the Stage 1s 3 or 4 years age.You might want to try and track down whoever bought all the spares.When it was all sold of you lot had more vehicles and spares in one place than anywhere else in the world i would say.
Terry
Posted: Fri Oct 02, 2009 5:58 pm
by pomme fritz
Thanks guys,
Have been looking for bushes in NZ and there don't seem to be too many about. I'll defo look up the pegesus ones next week though. Might call into P.A. Blanchards too (an Aladins cave!)
Cheers, Fritz
Posted: Fri Oct 02, 2009 10:55 pm
by djam1
There is a Land Rover shop in Australia that are modifying Series 3 Railkos and pins for use in Stage1s they are cheap and readily available.
I have some on my way to me in the post at the moment.
Posted: Sat Oct 03, 2009 9:22 am
by Kiwistage1V8
djam1 wrote:There is a Land Rover shop in Australia that are modifying Series 3 Railkos and pins for use in Stage1s they are cheap and readily available.
I have some on my way to me in the post at the moment.
I'd be interested in finding out more about them please.
Posted: Sat Oct 03, 2009 10:53 am
by djam1
The business is
All 4x4 Spares in Newcastle on 02 49571117 speak to Peter Haylock and tell him Duane sent you.
He has sent me a set but I havent received them so I dont know how much he has charged me.
Posted: Sat Oct 03, 2009 9:12 pm
by Kiwistage1V8
Cheers for that mate.
Posted: Thu Oct 08, 2009 12:31 pm
by djam1
Got the modified parts today the Series 3 Railko is machined slightly shorter and the top face reduced slightly.
The pin is then shortened slightly allowing a setup that is remarkably like the original Stage 1 part the only comment would be that the pin is about 1.5 mm smaller than the Stage 1 not really an issue in my view.
Cost was less than AUD 100 per side