Hi,
Does anyone know where I can get decent made to measure or OE floor mats for the Stage 1? I have a concoction of mats in an array of varied condition plus it does look like I do have the remains of the original one on the passenger side. None of which of course are good enough to use as a template. Ideally I would like new ones that fit perfectly so making them up myself would be a last resort.
Regards Mark…
Front floor mats for a Stage 1 hard top
-
- Posts: 230
- Joined: Thu Apr 30, 2009 12:39 pm
- Location: Essex, UK
Front floor mats for a Stage 1 hard top
1983 Stage 1 V8 Hardtop (Mrs Bingham)
-
- Posts: 88
- Joined: Fri Aug 29, 2008 4:54 pm
- Location: Sudbury, Suffolk, UK
I made my mats!!
I had the original matting over the trasmission tunnel still in tact, but the actual floor was just bare metal.
So i invested in a rear load mat from paddocks, and cut it out. And if i say so myself, its looking quite good!
If you take your time, making them yourself will be worth it in the end
I had the original matting over the trasmission tunnel still in tact, but the actual floor was just bare metal.
So i invested in a rear load mat from paddocks, and cut it out. And if i say so myself, its looking quite good!
If you take your time, making them yourself will be worth it in the end
Now on the road, and loving it!!!! =)
These people claim to have them:
https://secure.pablanchard.co.uk/default.asp
https://secure.pablanchard.co.uk/StockL ... goryID=285
https://secure.pablanchard.co.uk/default.asp
https://secure.pablanchard.co.uk/StockL ... goryID=285
Alan
1983 ex-army FFR 109 Stage 1
2005 Disco 2 HSE TD5
1983 ex-army FFR 109 Stage 1
2005 Disco 2 HSE TD5
mats
I made a template using tape and standard series mats. Then purchased a huge piece of stable/horse box matting which is non slip, 8mm thick and acid resistant.
I've made mats for the front and the rear - looks great and very cheap.
Would have been a better job if I'd had the real ones as templates but looks really good with the added benefit of sound proofing.
I've made mats for the front and the rear - looks great and very cheap.
Would have been a better job if I'd had the real ones as templates but looks really good with the added benefit of sound proofing.
1970 Spitfire MKIII
1981 Laser 1 88643
1982 Stage 1 v8 SW
1992 Laser 2 9101 "Purple Reign"
2000 Laser Pico 4050
2001 Brompton M3L
2010 VW California GP 140 SE
2010 Brompton M6L
2010 Venture Ranger 16 Canoe
2010 Cube Ltd Pro
1981 Laser 1 88643
1982 Stage 1 v8 SW
1992 Laser 2 9101 "Purple Reign"
2000 Laser Pico 4050
2001 Brompton M3L
2010 VW California GP 140 SE
2010 Brompton M6L
2010 Venture Ranger 16 Canoe
2010 Cube Ltd Pro