seatbox lid layout
seatbox lid layout
Could someone confirm that the lids on the centre and RH (as sat in vehicle) are screw down type and the LH one is on a swively catch
Seems odd to mo to have the battery under one with a scre down lid, but looks to be how mine was (dont have the lids and lots of po messing so want to check) - if so me thinks an accessible battery kill switch is a good plan
Seems odd to mo to have the battery under one with a scre down lid, but looks to be how mine was (dont have the lids and lots of po messing so want to check) - if so me thinks an accessible battery kill switch is a good plan
-
- Posts: 19
- Joined: Wed Dec 07, 2011 7:37 pm
- Location: Sweden
-
- Posts: 130
- Joined: Tue Oct 25, 2005 4:07 am
- Location: New Zealand
My 110's seatbox is the one as the one in my stage 1, except for the cubby under drivers seat, and size of lid covering the battery box. (will be the same as disco's seatbox). I was going to remove the front fuel tank, and rivet in the cubby on the stage 1 as it had mint lids and panels.
The donor seatbox I got and stripped for the panels was from a civillian stage 1, but I never did it. Now I'm stoked because the seatbox in the 110 is pretty sloppy, so will rivet on the better panels and make it good.
It's even better because I scored some high back defender seats, and the bases lift out to get into the boxes under the seat! very posh. bahahahaha
The donor seatbox I got and stripped for the panels was from a civillian stage 1, but I never did it. Now I'm stoked because the seatbox in the 110 is pretty sloppy, so will rivet on the better panels and make it good.
It's even better because I scored some high back defender seats, and the bases lift out to get into the boxes under the seat! very posh. bahahahaha
Stop Global Whining.
Any chance of a pic, of the RH one,Greenmobile wrote:Yep, just as you say.
I've a battery isolator connected through the front of the drivers (RHD) seatbox at the moment.
Cheers.
I cant see any evidence of where mine has been screwed down (no obvious holes for screws) and no holes in the front for a catch to be removable
now confused
-
- Posts: 19
- Joined: Wed Dec 07, 2011 7:37 pm
- Location: Sweden
-
- Posts: 19
- Joined: Wed Dec 07, 2011 7:37 pm
- Location: Sweden