not started in bout 6 years
not started in bout 6 years
hi i have recently bought my stage 1 v8 and it hasnt been started for a few years what do i need to do apart from charge batteries and change the oil any input would be grateful.reason for asking am 21 years old and havent worked on something older than me.thanks alex
I would (and do) the following
New oil and filter
Remove spark plugs and turn over by hand (check nothing is stuck), socket on the crank nut if you haven't got a crank handle (ensuring its not in gear )
Check is has coolant
Fresh petrol - your chances of getting it going on the stale sludgy stuff in there after that long are low ... (if it smells like petrol in the tank id give it a go), if it smells horrible then drain it, and change the fuel filter as well and put fresh fuel in
Check the carb dashpots (little black screw caps on the top) have oil (if not it will run horribly) ...will still run though
Then give it a go
New oil and filter
Remove spark plugs and turn over by hand (check nothing is stuck), socket on the crank nut if you haven't got a crank handle (ensuring its not in gear )
Check is has coolant
Fresh petrol - your chances of getting it going on the stale sludgy stuff in there after that long are low ... (if it smells like petrol in the tank id give it a go), if it smells horrible then drain it, and change the fuel filter as well and put fresh fuel in
Check the carb dashpots (little black screw caps on the top) have oil (if not it will run horribly) ...will still run though
Then give it a go
Hi there, Well mine hadn't been running for about 8 years when i brought it last year.
1. Check condition of fuel tank and if good add some fresh fuel( mine had a rotten tank)
2. Check condition and gaps of Plugs & Points if in doubt change them
(along with the condenser)
3. Check or renew the fuel filters/ air filters
4. might also pay to strip the carbs down & inspect/clean them (mine were full of sand).
Once you're happy with what you've done, have a go at starting it.........
Believe me when you hear it fire up you'll be well chuffed
Rob
1. Check condition of fuel tank and if good add some fresh fuel( mine had a rotten tank)
2. Check condition and gaps of Plugs & Points if in doubt change them
(along with the condenser)
3. Check or renew the fuel filters/ air filters
4. might also pay to strip the carbs down & inspect/clean them (mine were full of sand).
Once you're happy with what you've done, have a go at starting it.........
Believe me when you hear it fire up you'll be well chuffed
Rob
http://s850.photobucket.com/albums/ab66 ... an/Series/
Series 3 stage 1 109( now off to usa)
Series 3 stage 1 109( now off to usa)
You beat me to it 5988
http://s850.photobucket.com/albums/ab66 ... an/Series/
Series 3 stage 1 109( now off to usa)
Series 3 stage 1 109( now off to usa)
thanks done most of that already.handy thing is i know most of history as i bought it off my dad and he owned it for 15 years.is it worth stripping the starter solenoid as i have heard they can corode between the contacts???all help is much apreciated.
p/s sorry for spelling was never my strong point lol
p/s sorry for spelling was never my strong point lol
if it aint broken leave it alone.
if it aint a v8 beware
if it aint a v8 beware
i looked at it this afternoon and think am just gonna wait and see it it works looks a bit tight with the heat exchanger (silver metal plate with mushroom)next to it.am just waiting on batteries charging hopefully get her started tomoorow phoning paddock first thing for parts thats needed unless you know of a better/cheaper supplier??
if it aint broken leave it alone.
if it aint a v8 beware
if it aint a v8 beware
Depends what you need
The best supplier for stage 1 bits ive found is P.A Blanchards , allot of people don't seem to have the stage 1 specific bits
Paddocks are generaly the cheapest ive found for basic, generic parts
Beware cheap parts .....there not always worth it ....
how about an introduction post with some pic of the stage 1 ?
The best supplier for stage 1 bits ive found is P.A Blanchards , allot of people don't seem to have the stage 1 specific bits
Paddocks are generaly the cheapest ive found for basic, generic parts
Beware cheap parts .....there not always worth it ....
how about an introduction post with some pic of the stage 1 ?
There appears to be lots of alex roy's on therealex9588 wrote:i tried to post a pic but wouldnt let me cause the file is to big help with this would be handy aswell lol.if you are on facebook add me on there and look alex roy am on just now
my email is althorpeal@Aol.com ...should find me then
to post pics
I host mine on photobucket (its free...there are better ones though)
then once your pic is uploaded there simply copy the IMG line of text into the post
as below (if you quote my post you should be able to see the image line , begins
ok new problem according to my battery charger both batteries are now charged but when connected back to car i get no ignition lights when i put carger on battery when they are connected i get ignition lights...has me mega confused now.anyone have any ideas??
if it aint broken leave it alone.
if it aint a v8 beware
if it aint a v8 beware
Not good with electrics ....someone else can probably be more help but for noalex9588 wrote:ok new problem according to my battery charger both batteries are now charged but when connected back to car i get no ignition lights when i put carger on battery when they are connected i get ignition lights...has me mega confused now.anyone have any ideas??
Is the battery actually charged, what voltage you got across it
I would guess at the battery if its been stood flat for 6yrs isnt actually being charged
Have you got another battery you can swap onto it to test if its battery or vehicle issue