bellhouse.
bellhouse.
hi.
what is the differince between series bellhouse and range rover..
the stage 1 is longer, but how much.
regards jens
what is the differince between series bellhouse and range rover..
the stage 1 is longer, but how much.
regards jens
-
- Posts: 41
- Joined: Wed Dec 02, 2009 12:10 am
Yup, just to add to the above. All LT95 Range rover and stage 1 bellhousings are the same. 101's are shorter by around 108mm. I've just put one in my stage 1 with a 6.2 GMC diesel.
The other manual gearboxes used by the Range rover, LT77 and R380, have many and varied bellhousings which are interchangeable (along with the first motion shaft where applicable) throughout the whole modern landrover range except the LT95. Discovery the longest, 2.5 N/A diesel the shortest.
What are you up to that inspired the question? Engine conversion?
The other manual gearboxes used by the Range rover, LT77 and R380, have many and varied bellhousings which are interchangeable (along with the first motion shaft where applicable) throughout the whole modern landrover range except the LT95. Discovery the longest, 2.5 N/A diesel the shortest.
What are you up to that inspired the question? Engine conversion?
-
- Posts: 55
- Joined: Sat Oct 04, 2008 6:55 pm
- Location: Milton Keynes
-
- Posts: 55
- Joined: Sat Oct 04, 2008 6:55 pm
- Location: Milton Keynes
Thanks - I stand corrected. Wouldn't you know I'd forgotten all about that and didn't look at the coverplates for the Rangie housing. My Rangie parts book says:
Up to gearbox #35506011A = bellhousing #571832 (this is the pressed steel coverplate 610926)
From gearbox #35506012A to 35567045C = bellhousing #594175 (cast ally coverplate 594086)
From gearbox #35567046C = bellhousing #FRC2858, which is the same as the Stage I. (cast ally coverplate FRC2859)
But this is the only difference and the input shafts are the same.
Up to gearbox #35506011A = bellhousing #571832 (this is the pressed steel coverplate 610926)
From gearbox #35506012A to 35567045C = bellhousing #594175 (cast ally coverplate 594086)
From gearbox #35567046C = bellhousing #FRC2858, which is the same as the Stage I. (cast ally coverplate FRC2859)
But this is the only difference and the input shafts are the same.
-
- Posts: 41
- Joined: Wed Dec 02, 2009 12:10 am
Hi, out of the subject, I have tried to search for "belhouse" in www.lrseries.com, and I have got this result:
Your search for "bellhouse" in category "Land Rover Series 1948-1984" returned the following results:
Your search returned no results. Try using a different search or browsing one of our product categories in the menu.
Your search for "bellhouse" in category "Land Rover Series 1948-1984" returned the following results:
Your search returned no results. Try using a different search or browsing one of our product categories in the menu.
wonderful sport!
1984 SeriesIII ex-melitary, 109 inch, V8 stage one
1984 SeriesIII ex-melitary, 109 inch, V8 stage one