front half shafts

offroad-mudslinger · Post by **offroad-mudslinger** » Sat Sep 26, 2009 9:22 am

Hi there does anyone know where i can get front half shafts for my stage one axle and are there any heavy duty ones made,also the cv,s will any thing else fit,was told early 110 ones will go in,any answers would be a great help.

5988 · Post by **5988** » Sat Sep 26, 2009 9:44 pm

blanchards list the CV's not sure on the full shaft assembly ...sit down before asking how much though

djam1 · Post by **djam1** » Sun Sep 27, 2009 5:01 am

Couldnt imagine 110 axles fitting as the coil sprung rovers had different axle widths.
The standard 10 spline axles will fatigue and fail (usually the short side)
In Australia we can buy Maxi Drive shafts for Stage 1 s the last time I bought a pair they
were about $700 AUD these axles are far more fatigue resistant and are in fact stronger than standard 24 spline axles.

Andy Dawe · Post by **Andy Dawe** » Sun Sep 27, 2009 8:05 am

If you get really stuck and have a few quid burning a hole in your pocket. Ashcrofts can build custom drive shafts and cv joints. Not cheap best find NOS from somewhere. good luck