front half shafts

Technical questions and answers
Post Reply
offroad-mudslinger
Posts: 14
Joined: Mon Aug 10, 2009 2:43 pm
Location: essex

front half shafts

Post by offroad-mudslinger »

Hi there does anyone know where i can get front half shafts for my stage one axle and are there any heavy duty ones made,also the cv,s will any thing else fit,was told early 110 ones will go in,any answers would be a great help.
5988
Posts: 692
Joined: Fri Mar 13, 2009 8:57 pm
Location: Lincolnshire

Post by 5988 »

blanchards list the CV's not sure on the full shaft assembly ...sit down before asking how much though
djam1
Posts: 52
Joined: Thu Jun 02, 2005 10:59 am
Location: Karratha WA

Post by djam1 »

Couldnt imagine 110 axles fitting as the coil sprung rovers had different axle widths.
The standard 10 spline axles will fatigue and fail (usually the short side)
In Australia we can buy Maxi Drive shafts for Stage 1 s the last time I bought a pair they
were about $700 AUD these axles are far more fatigue resistant and are in fact stronger than standard 24 spline axles.
Andy Dawe
Posts: 208
Joined: Tue Nov 15, 2005 8:24 pm
Location: Kent. UK

Post by Andy Dawe »

If you get really stuck and have a few quid burning a hole in your pocket. Ashcrofts can build custom drive shafts and cv joints. Not cheap best find NOS from somewhere. good luck
Post Reply