4 Barrel Weber/manifold/filter/cam etc

foggydave · Post by **foggydave** » Wed Oct 04, 2006 7:20 am

Hi

I am selling the kit below hopefully as a job lot. All the parts complement each other and really add to the V8 experience. I bought these for a 3.5 V8 but they may fit a 3.9, I do not know.

1 x 4 barrel Weber carb *
1 x Edlebrock inlet manifold *
1 x RPi special thermostat housing *
1 x 3 inch pancake filter *
* used for approx 400 miles

1 x Real steel DW262 Hurricane high lift cam shaft**
1 x Set of Rhoades hydraulic lifters**
** Not used but I have had for a few years in garage and some surfaces are tarnished but no surface damage

1 x 2 inch pancake filter new

THe retail price new of all this is over a £1000 I am looking for £650 plus post and packaging at cost ( the weight is approx 30 kg )

The kit minus the cam shaft, lifters. and one filter would be £500.

jonnyboy · Post by **jonnyboy** » Wed Oct 04, 2006 8:58 am

Have you tried advertising them on here http://www.v-8.org.uk/forum/default.asp

foggydave · Post by **foggydave** » Wed Oct 04, 2006 12:44 pm

Thanks I will give it a try I tend to forget there are a lot more makes than Landrovers have Rover V8s in them

foggydave · Post by **foggydave** » Sat Oct 07, 2006 7:14 am

I am putting this lot on Ebay soon and will start at £550 no reserve so any offer over £525 the lot plus P&P would be ok.