Chassis measurements

primsil · Post by **primsil** » Wed Sep 21, 2005 9:41 am

If anyone needs the chassis measurements for a stage1 I have them scanned and will email to anyone asking. Cheers.

Woop · Post by **Woop** » Sun Jul 02, 2006 8:23 am

Yes ,very desperate for Stage 1 Chassis measurements here as i'm converting a standard 109 Chassis to a that of a Stage 1. In particular if any-one there has a measurement of the distance between the bottom gearbox mounting hole in the chassis and the front spring hanger would be great. Just trying to work out exactly engine/gearbox positioning in the chassis. If any-one has any pics, that would also be very helpful. Also, does the rear drive-shaft run exactly parallel with the chassis rails or is it slightly off-set. When mounting my LT 95 in my chassis, the rear propshaft flange is not exactly parallel with the rear diff flange.

Thanks
Nick

primsil · Post by **primsil** » Sun Jul 02, 2006 8:44 am

you havent filled in your email in your profile so you will have to email me an address to send it to. Can probably give you the other measurements also.