Technically not especially gifted here. But I have a decent mechanic. Here in Indonesia.
Will a PTO off a S3/Swb fit onto the LT95 transfer case. I looked at it. It looks ok, albeit a tight fit. I just want to know if the transfer case PTO plate is the same?
The bloke wants a fair bit for the PTO and I don't want to find out it doesn't fit. He's quite far away so I can't physically inspect the PTO and measure it.
Putting a S3 PTO in a Stage One
Putting a S3 PTO in a Stage One
All advice/input welcome!
Driving an '83 limestone Stage One
Driving an '83 limestone Stage One
Re: Putting a S3 PTO in a Stage One
This is the PTO housing.
- Attachments
-
- Screenshot_20210420-173156-01.jpeg (171.83 KiB) Viewed 3222 times
All advice/input welcome!
Driving an '83 limestone Stage One
Driving an '83 limestone Stage One
Re: Putting a S3 PTO in a Stage One
Considering that the parts list doesn't even list the same gasket for the two variants, I'd say not.
Re: Putting a S3 PTO in a Stage One
Pretty sure thats a No - but with modifications everything is possible
Michael
1965 109 FC SIIA
1982 109 V8 SIII CSW Stage One
1982 109 V8 SIII HCPU Stage One
1990 RRC Vogue SE
1965 109 FC SIIA
1982 109 V8 SIII CSW Stage One
1982 109 V8 SIII HCPU Stage One
1990 RRC Vogue SE
Re: Putting a S3 PTO in a Stage One
Thanks gentlemen. I'll stick to my hand winch, snatch block, and assortment of ropes. Local blokes say the PTO winches can be dangerous if you are not super careful. And I'm not super careful.
All advice/input welcome!
Driving an '83 limestone Stage One
Driving an '83 limestone Stage One
Re: Putting a S3 PTO in a Stage One
So yeah. Series III won't go in. Pretty much everything is different to an LT95 PTO output.
I have a PTO winch on mine and it is fine, safetywise.
I have a PTO winch on mine and it is fine, safetywise.
Alan
1983 ex-army FFR 109 Stage 1
2005 Disco 2 HSE TD5
1983 ex-army FFR 109 Stage 1
2005 Disco 2 HSE TD5