Front brakes
Re: Front brakes
Looks right.
Is your servo working so you're actually receiving peddle assistance?
Is your servo working so you're actually receiving peddle assistance?
Re: Front brakes
That’s another good question.
I’m comparing back to back with the 4 cyl shoes & drums so I don’t see the servo as a factor at the moment.
Those adjuster bolts are rusted & seized so I might cut them off/drill & tap a new thread to insert stainless bolt & lock nut.
I’m comparing back to back with the 4 cyl shoes & drums so I don’t see the servo as a factor at the moment.
Those adjuster bolts are rusted & seized so I might cut them off/drill & tap a new thread to insert stainless bolt & lock nut.
Re: Front brakes
If you just fit the probably missing wooden/fibre pads you might find they will be in the right place.
Re: Front brakes
They're clearly illustrated in your parts list, otherwise google the part number for a picture.
Re: Front brakes
Just for peoples future reference as I've replaced mine with genuine posts form PABlanchard..(In a nice old school Girling box and wax paper!)
This is what the adjustment posts look like...
Don't quite know how you get the adjustment perfect but it looks wquite obvious by eye when they aren't 90 deg to the back plate..?
This is what the adjustment posts look like...
Don't quite know how you get the adjustment perfect but it looks wquite obvious by eye when they aren't 90 deg to the back plate..?
Last edited by Fish on Sun Apr 25, 2021 9:48 pm, edited 2 times in total.
Re: Front brakes
I printed some up about of ABS on the 3D printer and they are working well.