Hi friends!
For a friend, I research the 2 front halfshafts for her Stage One, new orvery good condition:
Right side: FRC2930
Left side: FRC2931
Please! Thank you!
God save the Stage One!
Sebastien
wanted the 2 front halfshafts for Stage One
wanted the 2 front halfshafts for Stage One
1980 Half track Centaur "the Holy Grail", 6 made.
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
- firemanshort
- Posts: 378
- Joined: Fri Feb 10, 2006 2:42 pm
- Location: Loudoun County, VA - near Wash DC
Re: wanted the 2 front halfshafts for Stage One
You would be lucky to find some - and they will not be cheap.
I recommend you do some searching around the various forums and learn about using early Defender outer shafts. I am using one on my truck - I have a little less than 2 years of service on it (4,000 miles - some of them being hard off road miles) and it has performed well for me.
I recommend you do some searching around the various forums and learn about using early Defender outer shafts. I am using one on my truck - I have a little less than 2 years of service on it (4,000 miles - some of them being hard off road miles) and it has performed well for me.
-----------------------------------
Firemanshort
Virginia, USA
Firemanshort
Virginia, USA
Re: wanted the 2 front halfshafts for Stage One
https://www.johncraddockltd.co.uk/land- ... it-rh.html
https://www.johncraddockltd.co.uk/land- ... it-lh.html
(I believe this is where your picture's taken from - don't they have them?) (Or you could take firemanshort's advice)
https://www.johncraddockltd.co.uk/land- ... it-lh.html
(I believe this is where your picture's taken from - don't they have them?) (Or you could take firemanshort's advice)
Re: wanted the 2 front halfshafts for Stage One
Hi friends!
Thanks for your answer!
About forum, I prefer beginning by this. Maybe after, I go to another forums.
About John Craddock parts, I have see this parts but the price....too crazy! At this price, I prefer buying a complete Stage One for parts and remove the halfshaft.
If I don't find after few months, I know I can contact my friend John Craddock.
Nobody have halshaft or complete front axle, please? Merci d'avance!
Feu flamme!
Sébastien
Thanks for your answer!
About forum, I prefer beginning by this. Maybe after, I go to another forums.
About John Craddock parts, I have see this parts but the price....too crazy! At this price, I prefer buying a complete Stage One for parts and remove the halfshaft.
If I don't find after few months, I know I can contact my friend John Craddock.
Nobody have halshaft or complete front axle, please? Merci d'avance!
Feu flamme!
Sébastien
1980 Half track Centaur "the Holy Grail", 6 made.
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
- firemanshort
- Posts: 378
- Joined: Fri Feb 10, 2006 2:42 pm
- Location: Loudoun County, VA - near Wash DC
Re: wanted the 2 front halfshafts for Stage One
viewtopic.php?f=6&t=1920
I included some photos in that post that show the difference between Defender and Stage One CV joints.
I included some photos in that post that show the difference between Defender and Stage One CV joints.
-----------------------------------
Firemanshort
Virginia, USA
Firemanshort
Virginia, USA
Re: wanted the 2 front halfshafts for Stage One
Hi Firemanshort
Thank you fso much or the link: I send your solution to my friend.
God save the Stage One!
Sébastien
Thank you fso much or the link: I send your solution to my friend.
God save the Stage One!
Sébastien
1980 Half track Centaur "the Holy Grail", 6 made.
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...