wanted the 2 front halfshafts for Stage One

Your adverts or pointers to other adverts, Ebay, recommended suppliers etc.
Post Reply
User avatar
Satanas
Posts: 18
Joined: Tue Dec 16, 2008 12:23 pm
Location: in Champagne, FRANCE

wanted the 2 front halfshafts for Stage One

Post by Satanas »

Hi friends!
For a friend, I research the 2 front halfshafts for her Stage One, new orvery good condition:
Image
Right side: FRC2930
Left side: FRC2931
Please! Thank you!
God save the Stage One!
Sebastien
1980 Half track Centaur "the Holy Grail", 6 made.
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
User avatar
firemanshort
Posts: 378
Joined: Fri Feb 10, 2006 2:42 pm
Location: Loudoun County, VA - near Wash DC

Re: wanted the 2 front halfshafts for Stage One

Post by firemanshort »

You would be lucky to find some - and they will not be cheap.

I recommend you do some searching around the various forums and learn about using early Defender outer shafts. I am using one on my truck - I have a little less than 2 years of service on it (4,000 miles - some of them being hard off road miles) and it has performed well for me.
-----------------------------------
Firemanshort
Image
Virginia, USA
User avatar
Geoff
Posts: 599
Joined: Sat Oct 29, 2011 2:21 am
Location: Leicester UK

Re: wanted the 2 front halfshafts for Stage One

Post by Geoff »

https://www.johncraddockltd.co.uk/land- ... it-rh.html

https://www.johncraddockltd.co.uk/land- ... it-lh.html

(I believe this is where your picture's taken from - don't they have them?) (Or you could take firemanshort's advice)
2 1981 Stage One 109 V8 SWs
Image
User avatar
Satanas
Posts: 18
Joined: Tue Dec 16, 2008 12:23 pm
Location: in Champagne, FRANCE

Re: wanted the 2 front halfshafts for Stage One

Post by Satanas »

Hi friends!
Thanks for your answer!
About forum, I prefer beginning by this. Maybe after, I go to another forums.
About John Craddock parts, I have see this parts but the price....too crazy! At this price, I prefer buying a complete Stage One for parts and remove the halfshaft.
If I don't find after few months, I know I can contact my friend John Craddock.
Image

Nobody have halshaft or complete front axle, please? Merci d'avance!
Feu flamme!
Sébastien
1980 Half track Centaur "the Holy Grail", 6 made.
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
User avatar
firemanshort
Posts: 378
Joined: Fri Feb 10, 2006 2:42 pm
Location: Loudoun County, VA - near Wash DC

Re: wanted the 2 front halfshafts for Stage One

Post by firemanshort »

viewtopic.php?f=6&t=1920

I included some photos in that post that show the difference between Defender and Stage One CV joints.
-----------------------------------
Firemanshort
Image
Virginia, USA
User avatar
Satanas
Posts: 18
Joined: Tue Dec 16, 2008 12:23 pm
Location: in Champagne, FRANCE

Re: wanted the 2 front halfshafts for Stage One

Post by Satanas »

Hi Firemanshort
Thank you fso much or the link: I send your solution to my friend.
God save the Stage One!
Sébastien
1980 Half track Centaur "the Holy Grail", 6 made.
1982 Sandringham 6x6 "Le Grand Bleu"
1983 Fire engine Angus 6x6 "Robbie", unique prototype
...
Post Reply