Hi folks,
in my search for a Stage 1 V8 seat base I've come across one that I think is from a One Ten V8. It must be an early one (LT95 anther than LT85) as it seems to have the hole for the vacuum switch.
Could anyone share pictures of a standard Stage 1 seatbox so that I can compare - perhaps an old one from a rebuild thread?
Many thanks indeed.
Stage 1 vs One Ten V8 seat box - pictures?
Re: Stage 1 vs One Ten V8 seat box - pictures?
Look in the Series III Parts Catalogue on page 2G 12.It clearly shows the seat box and associated parts specific to the 109 V8.
Also, I think you will find the 110 to be quite different, aside from the 110 being wider than the 109.
Also, I think you will find the 110 to be quite different, aside from the 110 being wider than the 109.
Alan
1983 ex-army FFR 109 Stage 1
2005 Disco 2 HSE TD5
1983 ex-army FFR 109 Stage 1
2005 Disco 2 HSE TD5
- firemanshort
- Posts: 378
- Joined: Fri Feb 10, 2006 2:42 pm
- Location: Loudoun County, VA - near Wash DC
Re: Stage 1 vs One Ten V8 seat box - pictures?
This is my seat box with the floor pans sitting in position. The box had just come back from the Line-X shop.
- Attachments
-
- LineXseat.jpg (28.79 KiB) Viewed 3517 times
-----------------------------------
Firemanshort
Virginia, USA
Firemanshort
Virginia, USA
Re: Stage 1 vs One Ten V8 seat box - pictures?
Thank you very much - that is just what i was looking for.