I haven't got one on either, but when I bought it there was a clip on the back end and some small hook on the front. Don't know if it was originally on it..
I now have fitted a piece of 18 mm plywood to cover the complete seatbox fixed with 6 small bolts in rivenuts. (with opening over battery offcourse) Looks very clean, though not original.....
Different to mine as well. Mine has a slot on the back that the back edge of the seat box sits between and an over center catch on the front of the seat box that catches the lid. It slides under the seat base. Hope that makes sense.
Huzey
I started off with nothing, and still got most of it left!
1989 110 V8 Hard Top
Andy
Here she is.I thought this forum was Stage 1 only.I've actuall got 3 others as well.Been looking for good one for ages.Worth the wait.12 Months MOT.Owned by an enthusiast but died.New inner wings/floor/rear X member/sills,new tyres.Needs an O/drive though.
[img][img]http://img.photobucket.com/albums/v201/ ... 23ab_3.jpg[/img][/img]
1 Stage 1 V8 HiCap
1 Series 3 HiCap
1 LWB Steies 2
1 SWB Series 2
1 300 TDi Disco
1 4.6 HSE P38
1 V8 90 County
Nice one Tel,
I had one the same colour on an S plate but had a Daihatsu 2.8 Diesel engine. Put new inner wings on it and a new headlining. Got a huge dent in the bonnet when a side opening trailer tailgate swung round and smacked it one when I pulled over to let a tractor pass down a country lane.
Huzey
I started off with nothing, and still got most of it left!
1989 110 V8 Hard Top