Page 1 of 1

Replacement brake servo

Posted: Tue Nov 10, 2020 9:35 pm
by Finn1
What are folks doing for brake servos?

Suffice to say AEU1043 is not leaping out of the internet at me.

Will a Type 50 STC2878 (early 90/110) with the pedal end modified do the trick?

Re: Replacement brake servo

Posted: Tue Nov 10, 2020 10:26 pm
by Mik

Re: Replacement brake servo

Posted: Wed Nov 11, 2020 10:13 am
by Finn1
Thanks. STC1816 is the one.
"AEU1043 (STC1816) - SUPERCEDED BY STC1816"

Re: Replacement brake servo

Posted: Wed Nov 11, 2020 12:53 pm
by Cliff4WD
Seen the price of the Genuine one 😱

Re: Replacement brake servo

Posted: Wed Nov 11, 2020 1:50 pm
by Geoff
I needed one last year. My garage supplied and fitted a pattern one and said they'd guarantee it for a year if they did so, No problems so far (I hope not famous last words) It came in a Britpart box and was made in Taiwan, so I at least feel I'm doing my bit to support non-Communist Taiwan! :)

Re: Replacement brake servo

Posted: Wed Nov 11, 2020 2:01 pm
by Mik
doing my bit to support non-Communist Taiwan
:lol: :lol:

Re: Replacement brake servo

Posted: Wed Nov 11, 2020 4:15 pm
by Finn1
I've just looked a bit further at this & the STC1816 is the standard Series 2/3 6" servo. where the V8 (or mine is) has an 8" diameter servo.

The type 50 is also 8" & discussed here: http://www.expeditionlandrover.info/dual_brake_conv.htm

I'm not to keen on making the brakes worse.

Re: Replacement brake servo

Posted: Sat Jan 02, 2021 9:46 pm
by Eoforwic
Finn1 wrote: Tue Nov 10, 2020 9:35 pm What are folks doing for brake servos?

Suffice to say AEU1043 is not leaping out of the internet at me.

Will a Type 50 STC2878 (early 90/110) with the pedal end modified do the trick?
Yes, you'd just need to alter the clevis by re using your original. They both have the same rebuild kit too (18g8951l), so you could just rebuild your original instead.