Replacement brake servo

Technical questions and answers
Post Reply
Finn1
Posts: 33
Joined: Thu Jun 20, 2019 8:47 pm

Replacement brake servo

Post by Finn1 »

What are folks doing for brake servos?

Suffice to say AEU1043 is not leaping out of the internet at me.

Will a Type 50 STC2878 (early 90/110) with the pedal end modified do the trick?
User avatar
Mik
Posts: 201
Joined: Wed Sep 20, 2006 10:25 am
Location: Denmark

Re: Replacement brake servo

Post by Mik »

Michael
109" 1982 SIII CSW Stage 1 V8
109" 1965 SIIA FC
1991 RRC Vogue SE
Finn1
Posts: 33
Joined: Thu Jun 20, 2019 8:47 pm

Re: Replacement brake servo

Post by Finn1 »

Thanks. STC1816 is the one.
"AEU1043 (STC1816) - SUPERCEDED BY STC1816"
Cliff4WD
Posts: 204
Joined: Fri Aug 10, 2018 2:39 pm
Location: Rye, East Sussex, UK

Re: Replacement brake servo

Post by Cliff4WD »

Seen the price of the Genuine one 😱
Cliff

1981 109 V8 Stage 1
2000 Discovery 2 Td5

109 V8: viewtopic.php?f=6&t=2161
My Disco Thread: http://www.thed2boysclub.co.uk/viewtopi ... =3&t=58130

LAND ROVER. TURNING OWNERS INTO PAUPERS FOR 70 YEARS
User avatar
Geoff
Posts: 572
Joined: Sat Oct 29, 2011 2:21 am
Location: Leicester UK

Re: Replacement brake servo

Post by Geoff »

I needed one last year. My garage supplied and fitted a pattern one and said they'd guarantee it for a year if they did so, No problems so far (I hope not famous last words) It came in a Britpart box and was made in Taiwan, so I at least feel I'm doing my bit to support non-Communist Taiwan! :)
2 1981 Stage One 109 V8 SWs
Image
User avatar
Mik
Posts: 201
Joined: Wed Sep 20, 2006 10:25 am
Location: Denmark

Re: Replacement brake servo

Post by Mik »

doing my bit to support non-Communist Taiwan
:lol: :lol:
Michael
109" 1982 SIII CSW Stage 1 V8
109" 1965 SIIA FC
1991 RRC Vogue SE
Finn1
Posts: 33
Joined: Thu Jun 20, 2019 8:47 pm

Re: Replacement brake servo

Post by Finn1 »

I've just looked a bit further at this & the STC1816 is the standard Series 2/3 6" servo. where the V8 (or mine is) has an 8" diameter servo.

The type 50 is also 8" & discussed here: http://www.expeditionlandrover.info/dual_brake_conv.htm

I'm not to keen on making the brakes worse.
Eoforwic
Posts: 13
Joined: Thu Jun 11, 2020 9:07 pm
Location: West Herts

Re: Replacement brake servo

Post by Eoforwic »

Finn1 wrote: Tue Nov 10, 2020 9:35 pm What are folks doing for brake servos?

Suffice to say AEU1043 is not leaping out of the internet at me.

Will a Type 50 STC2878 (early 90/110) with the pedal end modified do the trick?
Yes, you'd just need to alter the clevis by re using your original. They both have the same rebuild kit too (18g8951l), so you could just rebuild your original instead.
Post Reply