Page 1 of 2

Kiwis

Posted: Tue Jan 10, 2012 5:31 am
by Kiwistage1V8
Looking for some stage 1 bits?

I'm selling my stage 1 in bits, I have acquired a defender. :?

24V starters, 2 front prop shafts mint, rear diff... all sorts, basically entire vehicle, good chassis, bulkhead etc...

Posted: Tue Jan 10, 2012 6:25 am
by map1275
Front panel with oil cooler pressing?
Hand throttle linkages?

Send me a PM if you have these available.

Posted: Tue Jan 10, 2012 7:28 am
by Kiwistage1V8
Yep, got a hand throttle... pm sent

Posted: Tue Jan 10, 2012 10:17 pm
by 5988
long shot this one

I'm after a front prop flange (from the gearbox) to fit the proper stage 1 prop

Would you be prepared to split it from the gearbox? and if so how much would you be looking inc postage to the UK (not in a rush so could go sea freight) - obviously shipping the whole gearbox wouldn't be viable

Posted: Wed Jan 11, 2012 6:55 am
by disco2hse
Mac, I'd be after one of those starters and that new indicator switch you got, and the head light lenses if they are in good nick.

Posted: Thu Jan 12, 2012 8:41 am
by Kiwistage1V8
5988 wrote:long shot this one

I'm after a front prop flange (from the gearbox) to fit the proper stage 1 prop

Would you be prepared to split it from the gearbox? and if so how much would you be looking inc postage to the UK (not in a rush so could go sea freight) - obviously shipping the whole gearbox wouldn't be viable
Hey mate, I'll look into it, see what is involved, and freight costs. I'll get back to you on that.

Just to clarify, front prop flange, do you mean the whole front output unit, or just the coupling flange off the end of the shaft?


Just letting you know though, I have got the whole LT95 listed on our equivalent of ebay, and really would prefer to sell it whole, not much call for it in bits I doubt, my reserve is NZ$100, but it is semi stripped with a worn intermediate shaft in the transfer case, so may well not sell.

Posted: Thu Jan 12, 2012 8:46 am
by Kiwistage1V8
disco2hse wrote:Mac, I'd be after one of those starters and that new indicator switch you got, and the head light lenses if they are in good nick.
Headlights are gone unfortunately, a mate has dibs on the indicator switch otherwise I would have called you and offered it to you. Sorry bout that. Good news though... I'll put the tidiest of the 3 starters I've got aside for you ($100) if you are keen.

1 outta 3 aint that good is it.... :?

Posted: Fri Jan 13, 2012 10:14 pm
by 5988
Kiwistage1V8 wrote:
5988 wrote:long shot this one
just the coupling flange off the end of the shaft?
That bit ^^

Can understand not wanting to split it - if you were in the UK id have the whole lot, but shipping the box would be ... well... :shock:

Posted: Sun Jan 15, 2012 9:31 am
by Kiwistage1V8
Alan, I've got a good indicator switch here, just pulled it out of the stage 1, looks real tidy, no corrosion, free with a starter motor.

:wink:

Posted: Tue Jan 17, 2012 9:12 pm
by disco2hse
TBH the starter was just a second thought. I just bought a new one a couple of years ago, so not keen on spending bucks on a second secondhand one now. :)

What I really need a is a new indicator switch, not a secondhand one, and new or good headlight reflectors.

Can't really think of anything else I need right now.

Oh,... what are your swivels like?

Posted: Fri Jan 20, 2012 4:42 am
by Kiwistage1V8
5988 wrote:
Kiwistage1V8 wrote:
5988 wrote:long shot this one
just the coupling flange off the end of the shaft?
That bit ^^

Can understand not wanting to split it - if you were in the UK id have the whole lot, but shipping the box would be ... well... :shock:
Hey mate, having now sold some parts off one for more than I wanted for the 2 gearboxes, I now have a flange that is yours for the price of shipping. I will get it off the output shaft this weekend, package it up and get a price to ship it to you. Just pm me with the address to send it....


quick question, are the flanges stage 1 specific? Or will the one off the RR LT95 be OK? Just that that is the one I have stripped down.... But I don't mind either way.

Posted: Fri Jan 20, 2012 4:44 am
by Kiwistage1V8
disco2hse wrote:TBH the starter was just a second thought. I just bought a new one a couple of years ago, so not keen on spending bucks on a second secondhand one now. :)

What I really need a is a new indicator switch, not a secondhand one, and new or good headlight reflectors.

Can't really think of anything else I need right now.

Oh,... what are your swivels like?
Swivels are immaculate and completely unmarked. astonishing I know. :lol:

But they were sold with the disc braked diff, complete. :D

Posted: Fri Jan 20, 2012 4:52 am
by disco2hse
Kiwistage1V8 wrote:Swivels are immaculate and completely unmarked. astonishing I know. :lol:

But they were sold with the disc braked diff, complete. :D
OK, them's the brakes (disc or otherwise). :)

Posted: Fri Jan 20, 2012 7:42 am
by Kiwistage1V8
:shock:

Just had a thought.

Alan, did you get alternator and starter with the 3.9? For sale?

Posted: Fri Jan 20, 2012 5:53 pm
by 5988
Kiwistage1V8 wrote:
5988 wrote:
Kiwistage1V8 wrote: That bit ^^

Can understand not wanting to split it - if you were in the UK id have the whole lot, but shipping the box would be ... well... :shock:
Hey mate, having now sold some parts off one for more than I wanted for the 2 gearboxes, I now have a flange that is yours for the price of shipping. I will get it off the output shaft this weekend, package it up and get a price to ship it to you. Just pm me with the address to send it....


quick question, are the flanges stage 1 specific? Or will the one off the RR LT95 be OK? Just that that is the one I have stripped down.... But I don't mind either way.
Yes it is stage 1 specific
Fits the prop you measured in this thread http://www.stage1v8.org.uk/phpBB2/viewtopic.php?t=1578
The RR one is smaller as the RR didn't have a doubble cardan prop

pm on its way

Cheers