Restrictor plates 3,5 V8

[boer]

Want original restrictior plates to 3.5 V8 91hp , because I'm doing to build a hybrid RR / LR 88".
Norwegian traffic station requires original 91hp V8 engine with original restrictors fitted .....

Send me a mail if you have to sell or give away
Boer-l@online.no

(live in Norway)

Regards Børge

[disco2hse]

OK, no one has replied and I think that it is, as with me, when the restrictors were removed they were chucked away. I doubt you will find what you are looking for as second hand because when they are removed they tend to get destroyed/damaged and I doubt they are available as new. Instead, you might need to consider getting a replacement inlet manifold which still has restrictors in place. Perhaps swapping with someone has has them and doesn't want them.

[map1275]

I have seen them on e-bay. I think it was ex USA and the guy wanted serious money. Also I believe I found them by accident on one UK L-R parts site. Once again they weren't cheap.

Simple logic these days... if you need this kind of part then you are probably desperate, so cough up.


I'm just waiting till the local laws change and demand emission testing. Virtually everything from July 1976 > early 1980s will be off the road.

[boer]

Hi Thank you for your reply.
slightly damaged, has nothing to say.
Then I can use them as a template to create new ones.

But who sells such new restrictorer?
Is there any Internet shop that would take them?

Regards Børge

[sebking]

http://www.lrseries.com/shop/product/li ... ICTOR.html

http://www.lrseries.com/shop/product/li ... 729&page=1

[Jules]

I will be removing mine shortly, so I will take more care and make sure I don't damage them.
Yours for the Postage to Norwya!

Cheers,

Jules

[boer]

I will be removing mine shortly, so I will take more care and make sure I don't damage them.
Yours for the Postage to Norwya!

Cheers,

Jules

Thank you
Just let me know as they are removed.

Cheers

Regards Børge

[Jules]

Hi Boer,

I've checked my spare manifold and restrictors are gone and they have also been removed from V8 in current re-build!

So I can't help you. Sorry!

[boer]

Hi Boer,

I've checked my spare manifold and restrictors are gone and they have also been removed from V8 in current re-build!

So I can't help you. Sorry!

Ok, thanks anyway

Someone else who has?

Cheers

[boer]

Does anyone know the size of the holes in the restrictors? 10mm?

Someone else who has?

Cheers

[map1275]

They're not holes, it's four Venturis of about 1/2" ID.

[jollydolly1962]

ill have a look on mine tomorrow see if there still there .. ive been told the plate has 4 holes in is that correct.. if they are there ..you can have them...

[disco2hse]

ill have a look on mine tomorrow see if there still there .. ive been told the plate has 4 holes in is that correct.. if they are there ..you can have them...

See above.

[boer]

ill have a look on mine tomorrow see if there still there .. ive been told the plate has 4 holes in is that correct.. if they are there ..you can have them...

Thank you

If you do not have them, I have found that www.johncraddockltd.co.uk have them.

http://www.johncraddockltd.co.uk/produc ... ifold_.php

[landdani]

Their is a photo if you are interested:
http://www.stage1v8.org.uk/phpBB2/viewtopic.php?t=832