Search found 692 matches
- Sun Jul 27, 2014 12:43 pm
- Forum: Technical Discussion
- Topic: Hazard wiring
- Replies: 7
- Views: 5582
Re: Hazard wiring
Got it :D Managed to find a wiring diagram for a MGB which uses the same or very similar system - although the colours are different the principle was there. With that and a multi meter I've managed to work out the stage 1 system - will draw I up later, just in case anyone else gets stuck Fund my ha...
- Sat Jul 26, 2014 9:21 pm
- Forum: Technical Discussion
- Topic: Auxiliary gauges
- Replies: 6
- Views: 4322
Auxiliary gauges
Dd the stage 1 have any as standard or were they all options?
I seem to have a wire in the new loom for a voltage gauge, but when I got it there was the remains of oil pressure only - which the loom doesn't accommodate
I seem to have a wire in the new loom for a voltage gauge, but when I got it there was the remains of oil pressure only - which the loom doesn't accommodate
- Sat Jul 26, 2014 9:19 pm
- Forum: Technical Discussion
- Topic: Hazard wiring
- Replies: 7
- Views: 5582
Re: Hazard wiring
Still stuck with this one, Can't seem to work out how to make the system described in that link fit with the standard S3 wiring an hazard parts Seem to have many left over wires, and to need to cut into the loom to make that work ... Can't see LR supplied it then had you chop it about to make it fit...
- Sun Jul 06, 2014 2:05 pm
- Forum: Technical Discussion
- Topic: Hazard wiring
- Replies: 7
- Views: 5582
Hazard wiring
Anyone know where I can find the wiring diagram for them, can't find them even mentioned in the S3 or V8 supplements
The plugs are easy but I then have 5 or 6 wires to connect to, I have no idea where
The plugs are easy but I then have 5 or 6 wires to connect to, I have no idea where
- Sun Jul 06, 2014 1:46 pm
- Forum: Technical Discussion
- Topic: Auxiliary panel
- Replies: 1
- Views: 2526
Auxiliary panel
Could some post a photo showing possition of switches, lights etc
- Sun Jul 06, 2014 12:41 pm
- Forum: Technical Discussion
- Topic: Started relay
- Replies: 2
- Views: 2760
Started relay
Could anyone get the Lucas codes of the starter and brake fail relays.
lR suppliers want silly money for what I'm sure will be a standard Lucas relay
lR suppliers want silly money for what I'm sure will be a standard Lucas relay
- Wed Jul 02, 2014 6:20 pm
- Forum: Technical Discussion
- Topic: Reverse light feed
- Replies: 6
- Views: 3987
Re: Reverse light feed
None of my electrics work !
Not yet anyway, all the dash still to go in before I power anything up, dont like the idea of having live wires dangling about while testing other bits
Not yet anyway, all the dash still to go in before I power anything up, dont like the idea of having live wires dangling about while testing other bits
- Mon Jun 30, 2014 8:06 pm
- Forum: Technical Discussion
- Topic: Need some part numbers
- Replies: 4
- Views: 3362
Re: Need some part numbers
Cheers, will give them a try That's the problem I have in the pressure switch, manual days part of the loom - not mine it isn't Ah well, will go looking for one and chop it out I'm sure I've seen a part no for the buffers somewhere, one of the forums just can't find it now and never found it in the ...
- Mon Jun 30, 2014 8:02 pm
- Forum: Technical Discussion
- Topic: Reverse light feed
- Replies: 6
- Views: 3987
Re: Reverse light feed
Got wire in the loom from somewhere to the switch, (colour code is for the supply line if standard Lucas codes, just not clear where it comes from - I think I'll take a switched 12v from the fuse box and use that)
Then one from the switch to the light
Then the light to earth
Then one from the switch to the light
Then the light to earth
- Sun Jun 29, 2014 10:35 pm
- Forum: Technical Discussion
- Topic: Speedo cable routing
- Replies: 1
- Views: 2046
Speedo cable routing
Could anyone take some pics to show the routing of the speedo cable please
- Sun Jun 29, 2014 8:58 pm
- Forum: Technical Discussion
- Topic: Need some part numbers
- Replies: 4
- Views: 3362
Need some part numbers
Struggling to find part numbers for some bits I need The spare wheel rests on the bonnet - 4 off them, round things The ties that hold the wiring behind the dash - these http://i37.photobucket.com/albums/e64/landyrover/S3%20109V8/IMAG0982_zpsa848632c.jpg The connector onto the brake pressure switch,...
- Sun Jun 29, 2014 8:36 pm
- Forum: Introductions and Photos
- Topic: Hello/S1 Rebuild
- Replies: 162
- Views: 109485
Re: Hello/S1 Rebuild
Been plodding away slowly, go some more done Now worked out where most of the look goes Chopped various connectors off and the new chassis loom had different connectors to the new bulkhead loom - getting very bored of new stuff no fitting now :evil: Capped of various wires I don't need (not sure why...
- Sun Jun 29, 2014 8:18 pm
- Forum: Technical Discussion
- Topic: Reverse light feed
- Replies: 6
- Views: 3987
Reverse light feed
Gents, can anyone help out with where the reverse lamps should be fed from I can't find them in any of the manuals, sure they will be there somewhere, but ant find them Gt it sorted from the switch to the lamps, its the power to the switch I'm stuck with. I'd guess it would be fed from a ignition sw...
- Mon Jun 09, 2014 10:21 pm
- Forum: Technical Discussion
- Topic: Wiring help
- Replies: 3
- Views: 2878
Re: Wiring help
Thanks The manual I've been using is the one from this site, unfortunately the wiring codes are unreadable. Paper reprint is on order so hopefully next weekend all will be clear Brown wire at the alternator just doesn't see to have anywhere to go on the alternator - it won't reach anywhere else. A t...
- Sat Jun 07, 2014 9:35 pm
- Forum: Technical Discussion
- Topic: Wiring help
- Replies: 3
- Views: 2878
Wiring help
Working through this, as best I can with a combination of a S3 manual and RRC manual - as the S3 V8 supliment I have is a copy, and the wiring codes are almost inpossible to read I have some spare wires, This bworn one at the alternator - none of the LR's I have have a fourth connection, just the th...