Stage 1 V8

Outstanding! :D nice! can't wait to get my engine kick in. im in the middle of the project as well but standard 109 and way behind your progress. Thank you very much, I am happy if you like my work. greeting Frank I still had an e-fan in the fund. The placement is due to the fact that, with a littl...

Cooler mounted. The solder seams often tear on the small tubes. Prophylactically, there was a reinforcement on Sandy with such two-component putty https://up.picr.de/38160590hs.jpg https://up.picr.de/38160591dk.jpg I always mount the hose clamps for these things on a suitable mandrel first. The tran...

Air filter box and ignition cable mounted https://up.picr.de/38055239vq.jpg Then the Stahlflex cables were in the mail ... they were also installed immediately! https://up.picr.de/38055255ps.jpg https://up.picr.de/38055253zt.jpg https://up.picr.de/38055254rb.jpg ... and then I started assembling the...

We would not normally use gaiters in this part of the world. Mud, grit, and water can get trapped inside and cause rust and pitting on the balls. I have had quite good experiences with the gaiters. I also don't assemble them as specified. I place the seam at the bottom and also cut a hole at the lo...

Go on I didn't like the large amount of sealant on the front cover of the LT95. I'd rather have a look. http://wuerziworld.adbt2.ath.cx/tr/tr15.gif https://up.picr.de/37912549zg.jpg https://up.picr.de/38028459yz.jpg https://up.picr.de/38028461da.jpg https://up.picr.de/38028543fa.jpg The sealant woul...

Next act >> Front axle: .. I'll see you again > red < https://up.picr.de/37992370it.jpg https://up.picr.de/37992369zh.jpg Then out with that thing ... https://up.picr.de/37992409cc.jpg https://up.picr.de/37992408vl.jpg Thick paint is "smeared" over all screws ... I don't like that at all ...

... it continues with the next assembly: https://up.picr.de/37912543ya.jpg ... the clutch is brand new! https://up.picr.de/37912546nq.jpg ... when I see the sealing compound sausages I get the crisis. How can you ... http://wuerziworld.adbt2.ath.cx/mx/mx31.gif https://up.picr.de/37912549zg.jpg Alleg...

... and on it goes! Next act: Bend and flare the brake lines again. https://up.picr.de/37870355pj.jpg The rubber hoses are still being replaced by performance steel braided lines https://up.picr.de/37878609hh.jpg https://up.picr.de/37878610kq.jpg The chassis, which was previously only plugged togeth...

Take care of heat insulation, see exhaust in many places going close to chassis, shaft, etc. Hi tomo yes, you have to be careful. I have a distance of at least 1.5 cm everywhere. The Sandy is a big car but there is little space for the exhaust. I will attach the exhaust to strategic places to avoid...

Hello everyone I forgot to mention that before I riveted the floor in, I turned the tub and prettied it up inside. https://up.picr.de/37461984ed.jpg https://up.picr.de/37461985vc.jpg ... the professional may outside! Then it goes on at the exhaust. ADDENDUM: For the whole system I got a five-pack of...

Quite impressive I must say. I do standard Stage 1 HT now but it goes somehow slow. Hi tomo, ... I'm not as fast as it is here either. The construction of Sandy is a retrospective. I'm a little further on ... The parts from the galvanizing are also back. The holes drilled out again and one or the o...

ra ta ta ta http://wuerziworld.adbt2.ath.cx/mx/mx50.gif A Salisbury with Diff left! https://www.smilies.4-user.de/include/Grosse/smilie-gross_358.gif Thanks to a lot of support from Australia, I got the cream. http://wuerziworld.adbt2.ath.cx/mx/mx15.gif https://up.picr.de/37229250md.jpg ... and in ...

Fantastic work Frank, looks amazing!! I know that Sandringham from old - it used to be owed by Rossway, an estate local to me and was used on their shoots in the '90s. The estate got sold early 2000's and I lost track of it. Story goes it was a cancelled export vehicle. Used to be a regular site on...

That means that I would have the possibility to convert the drive of the 3rd axis to Perentie. I still had a Salisbury from Stage 1. The thing has been in the fund for a long time and is waiting to be reused. And the proverbs come true again. >> If you rest, you rust << For me it was dry but I think...

Holy crap Frank - nice finds ! Do you also have the Thomas Winch for the drive ? Hi Michael, Unfortunately, I don't (yet) have them. The usage profile envisaged for the Big Sandy does not stipulate that a winch must be used. I have other cars that the bottom PTO fits on. The 8000lb Thomas is great....