Stage 1 V8

Well, they are somewhere in my lock up which is about 120 miles away and I'll only be back there in early November.

They are part of a job lot of parts I bought from a dismantled V8.

According to the Alicerover thread he machined down the drive flange a little to the circlip to seat in the 110 CV joint. I'm guessing this is what the DDR kit has. Can one simply swap the whole swivel housing - from the 6 bolted flange outwards - from a Defender/110 on to the Stage 1 front axle, in...

I have a pair.

I've got a number of V8 Parts for Sale.

Pictures are available at this link:
https://www.dropbox.com/sh/w4cs447d67tz ... njIka?dl=0

Based in the New Forest.
I'm open to sensible offers. Smaller/lighter parts can be couriered but obviously the larger ones will need collection.

I've got these for sale: https://live.staticflickr.com/65535/50367657292_32dceffdf0_k.jpg 2020-09-19 14.12.54 by Finn Gheury , on Flickr https://live.staticflickr.com/65535/50367638402_beab376ffe_k.jpg 2020-09-19 14.13.02 by Finn Gheury , on Flickr https://live.staticflickr.com/65535/50367657292_32d...

I've not tried to fit them yet. Hopefully I'll have a look at it in the next couple of weeks.

In a recent job lot of V8 parts I bought there a 2 sets of back plates which are the same as the ones I have and some drums. The difference I’m on about is in the profile of the drum. The 4 cyl drum has a chamfer on the edge where the V8 one has a square edge With the o/a depth of the drums being th...

Hi Alan,
That sounds like a good plan.
I have a couple of sets of carbs now, and some other ancillaries.
Finn.

Yes. I’ll get some photos tomorrow.

Yes.

Do you mean the pedal/mounting/ master cylinder assembly?
If so yes, I’ve got a couple.

I went and liberated a load of parts from Keith’s shed(s)/garden/garage earlier in the week, basically as much as I could fit in/on the Landrover.
I have designs on some of it, but there a number of bits I’m happy to sell on if anyone is interested.

Blimey! :shock: :shock: :shock: Thanks for taking the time to post all that. I picked up a load of parts yesterday including an LT95 with over drive. The gears are out of the transfer case at the moment so I’ll try and get an understanding of what I have and need to get, then save some pennies and s...

Do your wheel cylinders have mounting studs or holes for bolts? Bolts Alternately, what is the bore diameter of the cylinders? Dunno What is the diameter of your drum (measured across wear the shoes run)? It will be 10 or 11". Dunno. It’s a bit difficult to measure them in situ but wider V8 sh...

One of the front wheel cylinders leaked so I bought a rebuild kit for the front axles (rear too) and fitted the cylinders & shoess only to find the hub wouldn’t go on. Suffice to say it seems to have standard 109 front brakes, I re-assembled the brakes with the old shoes. Having seen the size of...