Search found 17 matches
- Thu Apr 08, 2010 9:44 am
- Forum: Technical Discussion
- Topic: Carb Conversion and some free parts
- Replies: 3
- Views: 3183
FOC Parts .
Gone to somebody very local to me already - sorry . However I do have some other V8 engines in SD1 Rovers so I'll have a look at the weekend and see if they have similar fittings.
- Wed Apr 07, 2010 10:45 am
- Forum: Technical Discussion
- Topic: Carb Conversion and some free parts
- Replies: 3
- Views: 3183
Carb Conversion and some free parts
Hello everybody . As a result of a Holley carb and Edelbrock manifold conversion all the bits that have come off , manifold , carbs , aircleaner etc are available to anybody who wants them FOC . I am based near Braintree in Essex. For the record the new set up is something that has been done many ti...
- Tue Nov 10, 2009 11:02 pm
- Forum: Technical Discussion
- Topic: Disc Brake Conversion
- Replies: 12
- Views: 15698
Disc brakes
Thankyou Mr Map 1275 .
This is what I call a response to the question . In theory it suggests you like the idea of improved safe legal braking on a series landrover .
Wouldn't it be helpful if this was possible within reasonable cost .
Regards
Chris .
This is what I call a response to the question . In theory it suggests you like the idea of improved safe legal braking on a series landrover .
Wouldn't it be helpful if this was possible within reasonable cost .
Regards
Chris .
- Tue Nov 10, 2009 8:18 am
- Forum: Technical Discussion
- Topic: Disc Brake Conversion
- Replies: 12
- Views: 15698
legality
Hello - thankyou for the replies . I am very interested on your views on legality and if anyone could expand on this I would be very grateful . The fact that many people may think it is not required etc is appreciated however the question was of course "how much do people think is a reasonable ...
- Mon Nov 09, 2009 10:48 pm
- Forum: Technical Discussion
- Topic: Disc Brake Conversion
- Replies: 12
- Views: 15698
Disc Brake Conversion
Hello everyone .
As a matter of general interest what do you think is a reasonable price for a disc brake conversion ?
Best Regards
Chris
As a matter of general interest what do you think is a reasonable price for a disc brake conversion ?
Best Regards
Chris
- Sun Oct 18, 2009 9:46 pm
- Forum: Technical Discussion
- Topic: Trimmers
- Replies: 46
- Views: 22979
trim
Hello I also thought that the Exmoor trim door elbow rest and door card that I recently bought were very poor - vinyl not properly glued coming off round the edges , ally backing bent , crap packaging which was part of the problem , needs screwing on , no holes for the handles . In fact it is basica...
- Mon Oct 12, 2009 9:51 pm
- Forum: Technical Discussion
- Topic: Engine wiring - please help
- Replies: 9
- Views: 5332
Wiring .
Thankyou very much - an evening with good neighbour and meter , your information , lucas wiring colour code guides , well earned drink and all is well . This explains why the oil pressure gauge did not work - looks like it was never connected before . The oil temp sender has never had a spade on it ...
- Mon Oct 12, 2009 7:23 am
- Forum: Technical Discussion
- Topic: Engine wiring - please help
- Replies: 9
- Views: 5332
Three sendrs
This is helpful thankyou - so does anybody know which of the three senders does what on the oil pump housing.
Thanks
Chris .
Thanks
Chris .
- Sun Oct 11, 2009 9:47 pm
- Forum: Technical Discussion
- Topic: Engine wiring - please help
- Replies: 9
- Views: 5332
quick reply
hello - thankyou for the quick response . The vehicle has only done 25k and the loom is as close to new as it gets at this age no butchering at all -99%+ still in the original braid . There was only one , the original owner from new before me . After posting I read that there were sensors/senders fi...
- Sun Oct 11, 2009 7:28 pm
- Forum: Technical Discussion
- Topic: Engine wiring - please help
- Replies: 9
- Views: 5332
Engine wiring - please help
Hello everybody Any help with the colour coding of the loom going to the starter , oil pump area etc would be greatly appreciated . I seem to be short of one wire in the oil pump area , there were some very long wires that we thought went to the switch on top of the gearbox just behind the bellhousi...
- Wed Sep 30, 2009 10:14 pm
- Forum: Technical Discussion
- Topic: Cylinder Head Bolt
- Replies: 3
- Views: 2828
- Tue Sep 29, 2009 10:40 pm
- Forum: Technical Discussion
- Topic: Cylinder Head Bolt
- Replies: 3
- Views: 2828
Cylinder Head Bolt
Hello everybody . Here is the first of probably a lot of questions . I have one cylinder head bolt of the eight shortest ones that has a small female thread within a deeper head - at least twice the depth of the head of the other bolts . Can anyone tell me which is the intended position of this fema...
- Sun Sep 20, 2009 10:07 pm
- Forum: Introductions and Photos
- Topic: Hello from a new member
- Replies: 11
- Views: 8293
A few more pictures of the body work and also the radiator as requested http://i984.photobucket.com/albums/ae329/chrisbuckenham/19092009070.jpg http://i984.photobucket.com/albums/ae329/chrisbuckenham/19092009071.jpg http://i984.photobucket.com/albums/ae329/chrisbuckenham/19092009072.jpg http://i984....
- Sun Sep 20, 2009 9:53 pm
- Forum: Introductions and Photos
- Topic: Hello from a new member
- Replies: 11
- Views: 8293
- Thu Sep 17, 2009 10:39 pm
- Forum: Introductions and Photos
- Topic: Hello all.
- Replies: 11
- Views: 8629
In between Stansted and Sudbury
Hello chaps , I live halfway between you both in the sticks near Stisted .
Chris
Chris