Stage 1 V8

I am putting this lot on Ebay soon and will start at £550 no reserve so any offer over £525 the lot plus P&P would be ok.

Thanks for that I will email him now, We were looking for a fairly heavily indented number that shouls have been easily seen but the way you describe it it seems it needs hunting for.
Thanks Dave

Thanks I will give it a try I tend to forget there are a lot more makes than Landrovers have Rover V8s in them

Hi I am selling the kit below hopefully as a job lot. All the parts complement each other and really add to the V8 experience. I bought these for a 3.5 V8 but they may fit a 3.9, I do not know. 1 x 4 barrel Weber carb * 1 x Edlebrock inlet manifold * 1 x RPi special thermostat housing * 1 x 3 inch p...

Hi Just sold my 1981 stage 1 to a gentleman in the Netherlands who insisted that apart from the VIN plate on the bulkhead the chassis number should be stamped on the chassis at the drivers side in front of axle but despite scraping away a lot of schultze we could not find a number stamped anywhere. ...

Hopefully the gentleman is flying in on the 3rd to collect and drive back, but his communication has to say the least been abysmal. ( this may be a continental thing) As I posted the paperwork is minimal with no export documents I justtear of and retain the purple part of my tax doc and give him the...

Any problems getting a copy Ginga I can send Firemanshort a spare copy I have Although as I do not have a scanner it would be mailed over.
Is this the yellow crane jobby one.

Regards Dave

Thanks Londoner I have sussed it with the help of a girl with a broad Brummie (Gods country) accent at the DVLA Swansea You do now not need an Export certificate what I do is on my V5C logbook is tear off section 11 only (Notification of permanent export) and fill in the reast of the V5C as though I...

Hi I hopefully have just sold my Stage 1 to a gentleman in the Netherlands who again hopefully will collect it. My question is What do I need to do in the way of paperwork On the log book there is a section for exporting that mentions an export certificate. It also says I should keep the first page ...

Now on Ebay finishes Saturday
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=003
Lots of interest this could be your last chance to buy a really good motor

I would think you would have to prime the pump as the filter has been off for so long although you may get away with it I would not know but I would prime to be on the safe side. Yes its the 4 "splinish" ones ( there are special sockets for these) although I find a standard key fits these ...

Try Ebay shops

The one that springs to mind is Landrover orphanage

There is a front prop shaft on at the moment under Stage 1 V8

There is always the LROI web site

Hi Further to not selling my motor I have taken it back to standard trim ie standard carbs/exhaust etc. 1981 Stage1 3.5 V8 £1200 ( prefer not to haggle ) 31,500 miles 12 months MOT Tax to 30.11.06 http://i31.photobucket.com/albums/c364/foggydave/Landroversale002.jpg http://i31.photobucket.com/albums...

The electrical fuel pump never swiches off There is a fuel bypass line that takes any excess fuel not fed into the carbs back to the fuel tank This is one of the reasons why you never get vapour lock in a stage 1 as you do in other models The oil pressure gauge hole should be in the middle of the lo...

Hi I have just taken a tubular exhaust system off mine it has stainless boxes and was off a Range Rover the sound was really good it has a lot of welding as I had to cut it to fit the Stage1 Yours for £100 ono if interested I live in Glenfield Leicester A silencer is in 2 parts a front box to silenc...